Mindray A7 Operating Instructions

A7™ Operating Instructions 046-004667-00 3 - 43
System Interface System Tab
Default Settings Default Patient Size
(default=Infant, Adult, Pediatric)
Default Vent Mode (default=VCV,
SIMV-VC, PCV, SIMV-PC, PS)
NOTE: Default changes
take effect after next
case or when O.R.
defaults are loaded.
Select to set the default patient size.
Select to set the default mechanical
ventilation mode.
For default changes to take effect:
1. Press Accept.
2. Start next case.
3. End case.
Manage Defaults Save Defaults
Save as O.R. Defaults
Load User Defaults
Load O.R. Defaults
Restore Partial Defaults
Import Defaults
Export Defaults
Select Save Defaults or Save as O.R.
Defaults to save the current
configuration as the user default
configuration.
Select Load User Defaults or Load
O.R. Defaults to load the user default
configuration.
Select Restore Partial Defaults to
overwrite the user defaults and system
settings with the factory default
settings. Note that network settings
will not be restored.
Select Import Defaults to import a
copy of the defaults from the USB mass
storage device if one has been inserted
into an SB port at the rear of the A7
unit.
Select Export Defaults to export a
copy of the defaults to the USB mass
storage device if one has been inserted
into an SB port at the rear of the A7
unit.
SYSTEM TAB
BUTTON CHOICES DESCRIPTION
TABLE 3-10 System Tab Settings

Mindray A7 Specifications

General

Brand	Mindray
Model	A7
Category	Medical Equipment
Language	English