Mindray A9 Service Manual

1-1
1 Safety
1.1 Safety Information
DANGER
 Indicates an imminent hazard that, if not avoided, will result in death or serious
injury.
WARNING
 Indicates a potential hazard or unsafe practice that, if not avoided, could result in
death or serious injury.
CAUTION
 Indicates a potential hazard or unsafe practice that, if not avoided, could result in
minor personal injury or product/property damage.
NOTE
 Provides application tips or other useful information to ensure that you get the most
from your product.
1.1.1 Warnings
WARNING
 Do not operate the anesthesia system before reading this manual.
 All analog or digital equipment connected to this system must be certified passing
the specified IEC standards (such as IEC 60950 for data processing equipment and
IEC 60601-1 for medical electrical equipment). All configurations shall comply
with the valid version of IEC 60601-1. The personnel who are responsible for
connecting the optional equipment to the I/O signal port shall be responsible for
medical system configuration and system compliance with IEC 60601-1.
 This equipment must only be operated by trained, skilled medical staff.
 Before putting the system into operation, the operator must verify that the
equipment, connecting cables, and accessories are in correct working order and
operating condition.

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA