Mindray A9 Service Manual

9-1
9 Software Upload
List of software upload functions
SN
Software Upgrade
Package
Modules Included Latest Version
01 Avatar.mpkg
Bundle Version
01.00.00.04
Host Software
01.00.00.04
Linux Kernel
02.07.00.14
Status Screen Software
01.00.00.02
Linux Kernel (Status Screen)
02.07.00.14
Ventilator Control Module
01.00.00.01
Ventilator Protect Module
01.00.00.01
EFCS
01.00.00.01
EFCS PM
01.00.00.00
Power Board
06.01.00.03
Keyboard
05.00.00.08
FPGA
03.00.00.04
02 02_HFNC.pkg
High-Flow O2 Supply
Assembly
01.00.00.01
03 03_EVAP1_EVAP2.mpkg
Electronic Vaporizer 1
01.00.00.00
Electronic Vaporizer 2
01.00.00.00
04
04_EVAP1.pkg
Electronic Vaporizer 1
01.00.00.00
05
04_EVAP2.pkg
Electronic Vaporizer 2
01.00.00.00
Note: The software version shown here may not be the latest revision.
Note: Electronic Vaporizer 1 is used for upgrade when the electronic vaporizer is inserted in the
left vaporizer manifold of the machine. Electronic Vaporizer 2 is used for upgrade when the
electronic vaporizer is inserted in the right vaporizer manifold of the machine. The software
versions in the upgrade packages are the same. To upgrade two vaporizers together, use the
combination package for electronic vaporizers.

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA