Mindray A9 Service Manual

11-2
No. Name P/N Test Item After
Replacement
Remarks
1 Alarm lamp board PCBA 051-003208-00
5.1 Power-on self-test.
Check whether the lamp is
turned on in red, yellow,
and blue in turn.
/
2
Speaker assembly
115-065029-00
5.1 Power-on self-test
/
3 Main screen CPU board
FRU (A9)
115-077947-00(A9 US)
115-077949-00(A9
Canada)
5.1 Power-on self-test
For A8, the
A8 software
package
should be
upgraded
after the
maintenance.
4
Key lighting board FRU
115-077951-00
5.1 Power-on self-test
/
5
Display encoder knob
service kit (Top Hat
shaped)
115-066849-00
5.1 Power-on self-test.
Rotate and push the encoder
to check its functions.
/
6
Fresh gas encoder knob
service kit
115-066848-00
5.1 Power-on self-test.
Rotate encoder to check its
functions.
/

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA