Mindray A9 Service Manual

11-11
No. Name P/N Test Item After
Replacement
Remarks
1
N2O inlet assembly
(Canada)
115-066338-00
5.3.2 N2O supply test.
Check whether the N2O
pressure is displayed on
the small display.
/
N2O inlet assembly (US) 115-064069-00
5.3.2 N2O supply test.
Check whether the N2O
pressure is displayed on
the small display.
/
2
Air inlet assembly
(Canada)
115-066339-00
5.3.3 Air supply test.
Check whether the air
pressure is displayed on
the small display.
/
Air inlet assembly (US) 115-064065-00
5.3.3 Air supply test.
Check whether the air
pressure is displayed on
the small display.
/
3
O2 inlet assembly
(Canada)
115-066340-00
5.3.1 O2 supply test.
Check whether the O2
pressure is displayed on
the small display.
/
O2 inlet assembly (US) 115-064067-00
5.3.1 O2 supply test.
Check whether the O2
pressure is displayed on
the small display.
4
Pipeline negative
pressure inlet assembly
115-064073-00
5.12 Negative Pressure
Suction Tests
/

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA