Mindray A9 Service Manual

2-34
2.2.4.2 Sensor Adapter Board
Two types of sensor adapter boards are available: one with intrapulmonary pressure (Canada only)
and the other without intrapulmonary pressure.
The sensor adapter board is mainly used to process inspiratory and expiratory differential
pressure sensor signals, PEEP sensor signals, PAW pressure sensor signals, intrapulmonary
pressure sensor signals, and adapter three-way valve control signals.
Installation position of the sensor adapter board
Sensor adapter board (with intrapulmonary pressure, Canada only)
Sensor adapter board (without intrapulmonary pressure)
Sensor adapter board

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA