5
Preventing Infection
Please observe the following instructions to protect against the biohazardous
infection.
BIOHAZARD
Inappropriately handling samples, controls and calibrators may lead
to biohazardous infection. Do not touch the sample, mixture or waste
with your hands. Wear gloves and lab coat and, if necessary,
goggles.
In case your skin contacts the sample, control or calibrator, follow
standard laboratory safety procedure and consult a doctor.
Handling Reagents and Wash Solution
WARNING
Some reagents and wash solution may be corrosive to human skins.
Plaase handle the reagents and concentrated wash solution carefully
and avoid direct contact.In case your skin or clothes contact the
reagents or wash solution, wash them off with water. In case the
reagents or wash solution spill into your eyes, rinse them with much
water and consult an oculist.
Treating Waste Liquids
Please observe the following instructions to prevent environmental pollution and
personal injury caused by waste.
BIOHAZARD
Some substances in reagent, control, enhanced wash solution and
waste are subject to regulations of contamination and disposal.
Dispose of them in accordance with your local or national guidelines
for biohazard waste disposal and consult the manufacturer or
distributor of the reagents for details.
Wear gloves and lab coat and, if necessary, goggles.
Treating Waste Analyzer
Please observe the following instructions to dispose of the waste analyzer.
WARNING
Materials of the analyzer are subject to contamination regulations.
Dispose of the waste analyzer in accordance with your local or
national guidelines for waste disposal.
To Next Page
Loading...
Need help?
General
