3 Installation 3-1
3 Installation
3.1 Environmental Requirements
The system is for indoor use only.
The bearing platform should be leveled with gradient less than 1/200.
The bearing platform should be able to bear 75Kg weight.
The bearing platform should be 500mm-800mm high.
The installation site should be well ventilated.
CAUTION
The system radiates heat when running. A well-ventilated
environment helps keeping the room temperature stable. Use
ventilation equipment if necessary. Do not expose the system to
direct draft that may lead to unreliable results.
The installation site should be free of dust as much as possible.
The installation site should not be under the direct sun.
The installation site should not be close to a heat or draft source.
The installation site should be free of corrosive gas and flammable gas.
The bearing platform should be free of vibration.
The installation site should not be disturbed by large noise or power supply.
The system should not be placed near brush-type motors and electrical
contacts that are frequently powered on and off.
To Next Page
Loading...
Need help?
General
