9 Troubleshooting
9-2
9.2 Classification of Error Messages
Severity: Warning
Level Description Actions taken by the system
0 Errors to neglect The system only reminds you of the errors and will not take any actions.
1 Errors to flag tests The system flags the tests
when abnormity of the system occurs or the unreliable results are
generated due to any reasons during the test
2 Errors to invalidate
sample
When a test is invalidated due to the abnormal sample, the system will rerun the test
immediately.
3 Errors to skip sample Samples for certain tests are used out.
The system ignores all tests related to the sample and continues with other tests. You can
refill the sample and resume the tests after other tests are finished, or after clicking the Probe
Stop button.
4 Errors to invalidate
reagent
When a test is invalidated due to the erroneous reagent, the system will rerun the test
immediately.
5 Errors to skip reagent
Reagents for certain tests are used out.
The system skips all tests related to the reagent and continues with other tests. You can refill
the reagent and resume the tests after other tests are finished, or after clicking the Probe
Stop button.
6 Errors to invalidate
sample/reagent
The system will invalidate all tests that are related to the reagent and sample.
Severity: Pausing
Level Description Actions taken by the system
7 Errors to pause The system will pause the probe/mixing bar and invalidate all tests but those which already
To Next Page
Loading...
Need help?
General
