9 Troubleshooting 9-3
mixing bar have R1, sample and R1 dispensed and stirred.
8 Errors to pause
probe
The system will pause the probe and invalidate all tests but those which already have R1,
sample and R1 dispensed.
Severity: Stopping analysis
Level
Description Actions taken by the system
9 Errors to stop
analysis in
emergency
During analysis, certain errors occur so that photometric measurement of reaction liquid is
affected and the reaction disk cannot rotate normally or finish the photometric measurement.
Severity: Forbidding
Level
Description Actions taken by the system
10 Errors to forbid test
When errors of this level occur, all tests are forbidden even the system is in idle status. If the
system is running tests, no tests will continue in the next period, and all unfinished tests will be
invalidated. However, you can perform other operations, such as printing test results, inquiring
measurement records, etc.
Severity: Startup forbidden
Level
Description Actions taken by the system
11 Errors to forbid
startup
The operating software refuses to start up or is terminated, and then exits and returns to the
Windows operating system.
To Next Page
Loading...
Need help?
General
