Mindray BS-130 User Manual

3 Installation 3-
6
Figure 3-5 the liquid tubes connecting
CAUTION
When placing the deionized water tank and waste tank, ensure the
height difference between the top of the tank and the bottom of the
upper cabinet is within 500-800mm.
Ensure the deionized water pickup tube and waste tank tube are not
blocked, bent, or twisted.
 Install ISE module(optional)：Please refer to 4.8.3 Installing and Removing ISE
Unit.
CAUTION
When ISE module electrodes are installed, the power of ISE
module should always be turned on. If the power has been turned
off for more than 0.5 hour, please follow the instructions
demonstrated in the section 7.7.4 Storage of ISE Module.

Mindray BS-130 Specifications

General

Brand	Mindray
Model	BS-130
Category	Measuring Instruments
Language	English