Mindray SynoVent E5 User Manual

3-8
The ventilator works normally under supply pressure of 280 to 650 kPa. Supply pressure of
less than 280 kPa can impair the performance of the ventilator and even cease ventilation.
Supply pressure between 650 and 1000 kPa can impair the performance of the ventilator but
will not cause any hazard arising from high pressure gas.
3.4 Install the Support Arm
A. Fixing block knob B. Fixing block C. Hose hook
D. Support bar E. Support arm joint F. Support arm joint
G. Support arm joint
1. Loosen the fixing block knob. Place the fixing block onto the handle on the side of the
ventilator.
2. Tighten the fixing block knob.
D
C
B
A
F
E
G

Mindray SynoVent E5 Specifications

General

Brand	Mindray
Model	SynoVent E5
Category	Medical Equipment
Language	English