3-13
3. Mount the filters onto the inspiratory and expiratory ports.
4. Connect the inspiratory filter to the humidifier inlet via the hose.
5. Connect the humidifier outlet to the water trap via the hose. Then, connect the water trap
to the Y piece via the hose.
6. Connect the expiratory filter to the water trap via the hose. Then, connect the water trap
to the Y piece via the hose.
7. Place the breathing hoses onto the support arm hook.
The rated range of the ventilator breathing system (VBS):
Inspiratory and expiratory gas pathway resistance: 0~6cmH2O/ (L/s) at 60L/min
VBS compliance: 0~5ml/cmH2O
To Next Page
Loading...
