Mitel 6905 - Phone Features; Requirements; Installation and Setup

2
W
ELCOME PHONE FEATURES
• Mitel 6905 SIP IP Phone User Guide– Describes the most commonly used features and functions for
an end user. The User Guide can be downloaded from http://www.miteldocs.com.
• Mitel SIP IP Phones Administrator Guide– Describes how to set up the Mitel SIP IP phones on the
network and contains advanced configuration instructions. The Administrator Guide is intended for the
System Administrator and can be downloaded from http://www.miteldocs.com.
Phone Features
• 2.75" 128x48 Pixel non back-lit display
• Built-in two-port, 10/100 Megabit Fast Ethernet switch
• Class 1 Power-Over-Ethernet (PoE)
• Wide-band, full-duplex speakerphone for hands-free calls
• Wide-band 6900 handset
• 3 paper labeled personal programmable keys with LEDs
• Support for wall mounting using the 6800/6900 wall-mount kit
• Single call line support with LED
• Mitel Wireless LAN Adapter
Requirements
• Mitel communications platform with firmware release that supports 6900 phones.
• Access to a configuration server through Trivial File Transfer Protocol (TFTP) , File Transfer Protocol
(FTP), or HTTP(s) server.
• Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps] recommended).
• Category 5/5e straight-through cabling (Category 6 straight-through cabling required for optimum
Gigabit Ethernet performance).
• For Ethernet networks that supply inline power to the phone (IEEE 802.3af/ 802.3at) use an Ethernet
cable to connect from the phone directly to the network for power (no 48V AC power adapter required
if using Power-overEthernet [PoE]).
• For Ethernet networks that DO NOT supply inline power to the phone, use only the Mitel approved
power adapter to connect from the DC power port on the phone to a power source, or use a PoE power
injector or a PoE switch.
Installation and Setup
If your System Administrator has not already setup your 6905 SIP phone, please refer to the Mitel 6905
Installation Guide for basic installation and physical setup. For more advanced administration and
configuration information, System Administrators should refer to the Mitel SIP IP Phones Administrator
Guide.