12
G
ETTING STARTED IDLE SCREENS
NOTE:
• The phone will auto reboot after configuring the Voice Services at the initial bootup on the TUI.
• The phone will auto reboot if the user enters the configuration server details and/or configure a line on
the WebUI.
To view or edit the Voice Services settings on the Mitel 6905 SIP phone:
1. Press the (Options) key on the phone to enter the Options menu.
2. Navigate to Voice Services using the navigation keys and press the Select softkey.
3. Use the up and down navigation keys to choose either of the following and then press
the Next softkey.
– MiCloud Connect
– MiVoice Connect
4. Make the required changes.
5. Press the Save/Register softkey to save your changes.
Idle Screens
When the phone has successfully updated the configuration and connected to the network, the phone
displays the Idle State screen:
The Idle State screen lists your name (SIP screen name), extension (or phone number), and the date and
time. This screen is shown whenever your phone is not in use. The L1 in the upper corner in the above
example indicates the idle screen for the first line appearance. You can use the left and right arrow keys
to scroll through the idle screens for both line appearances on the 6905.
The second display line shows the following temporary messages if the event occurs:
• No Service
To Next Page
Loading...
