71
L
INE KEY AND PROGRAMMABLE KEYS SERVICES KEY
Your System Administrator can enable outgoing intercom calls on your phone. If enabled, you must
configure an Icom key on your phone to use for outgoing intercom calls. You must configure a program-
mable key with the function, Icom .
Configuring an Intercom Key
Mitel Web UI
1. Click on Operation > Programmable Keys.
2. Select from Key 1 through Key 3 .
3. In the Type field, select Icom.
4. In the Value field, enter the predefined number you wish to be dialed when the Intercom key is
pressed.
NOTE: If no value is defined, you will need to manually enter a number after pressing the Intercom
key.
5. Click Save Settings.
Using the Icom Key
IP Phone UI
1. Press the Icom key.
2. If no number was defined when configuring the key, enter the extension number of the person you
want to intercom.
3. After a beep tone, your phone automatically connects with the remote extension and you can speak
through its speaker.
4. To cancel intercom, press or hang up the handset.
5. When you are finished speaking, hang up the phone by placing the handset back on-hook or by
pressing . When you hang up, the remote phone also hangs up.
Services Key
The 6905 allows you to configure a Services key that, when pressed displays the Services Menu. The
Services Menu can also be accessed through the Options List.
To Next Page
Loading...
