64
L
INE KEY AND PROGRAMMABLE KEYS SPEEDDIAL/XFER
accesses the Call Forward menus. The menus that display are dependent on the Call Forward mode
(Account [default], Phone, or Custom) configured for the phone.
For more information about call forwarding and call forwarding modes, see Call Forward Configuration .
Configuring a Call Forward
Mitel Web UI
1. Click on Operation > Programmable Keys
.
2. Select from Key 1 through Key 3.
3. In the Type field, select Call Fwd.
4. Click Save Settings.
Speeddial/Xfer
The Speeddial key allows a number to be dialed quickly by pressing one key configured for speed
dialing. The Transfer key allows a call to be transferred to other recipients blindly or consultatively. The
Speeddial/Xfer key combines the Speed dial and Transfer key's functionality together allowing the user
to transfer calls or use speed dial with one key.
NOTE: It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using the
Speeddial/Xfer feature. For more information about this parameter, see Switch UI Focus to Ringing Line .
Speeddial/Xfer Key Requirements and Functionality
The Speed Dial/Xfer key has the following capabilities:
• Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer key
causes the phone to go offhook and dial the predefined extension.
• Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed
Dial/Xfer key blind transfers the call to the predefined target. If transferring a call fails, a message
Transfer Failed displays, and you can reconnect the call (get the call back) by pressing the line key
again.
• Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speed
Dial/Xfer key forwards the call to the predefined extension.
To Next Page
Loading...
