73
L
INE KEY AND PROGRAMMABLE KEYS PAGING KEY
Configuring a Phone Lock Key
Mitel Web UI
1. Click on Operation > Programmable Keys.
2. Select from Key 1 through Key 3 .
3. In the Type field, select Phone Lock.
4. Click Save Settings.
NOTE: You can lock/unlock the phone using the new key you just configured, using the Mitel Web UI
at the path Operation > Phone Lock , or using the Phone Lock option on the IP phone UI at the
path Options > Phone Lock . For more information about using the lock/unlock feature, see
Locking/Unlocking a Phone .
Paging Key
You can configure a Paging key on the phone that allows you to send a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without involving SIP signaling. You enter a multi-
cast IP address(es) and a port number for the Paging key, that when pressed, initiates an outgoing multi-
cast RTP session. This is called Group Paging on the IP phones.
You can also specify group paging RTP addresses that the phone listens for when receiving RTP
streams. You can specify up to 5 listening multicast addresses at the path, Basic Settings > Preferences
> Group Paging RTP Settings.
For more information about Group Paging and how it works, and to specify multicast addresses, see
Group RTP Paging .
To Next Page
Loading...
