60
L
INE KEY AND PROGRAMMABLE KEYS FLASH KEY
3. For menu and directory services, select a service to display the information for that cus-tomized
service. Message services display to the screen after pressing the key. For user input services, follow
the prompts as appropriate.
4. To exit from the XML screen, press the key.
Flash Key
You can set a programmable key to generate a flash event when it is pressed on the 6905. You do this
by setting the key to Flash. The IP phone generates flash events only when a call is connected and there
is an active RTP stream (for example, when the call is not on hold).
Configuring a Flash Key
Mitel Web UI
1. Click on Operation > Programmable Keys.
2. Select from Key 1 through Key 3.
3. In the Type field, select Flash .
4. Click Save Settings.
Sprecode Key
You can set a programmable key to automatically activate specific services offered by the server. For
example, if the sprecode value of *82 is configured, then by pressing the Sprecode key, *82 automatically
activates a service provided by the server. Contact your System Administrator for information about avail-
able services.
To Next Page
Loading...
