Mitel 6905 - Display and Time Settings

29
C
USTOMIZING YOUR PHONE DISPLAY
Display
Contrast Level
The Contrast Level option on the IP phone allows you to set the amount of contrast on the LCD display.
You can set the contrast level using the IP phone UI only.
Setting the Contrast Level IP Phone UI
1. Press on the phone to enter the Options List.
2. Select Preferences .
3. Select Display.
4. Select Contrast Level.
5. Use the navigation keys to increase or decrease the amount of contrast on the screen.
6. Press the key or Select to save your selection.
Live Dialpad*
The Live Dialpad option on the IP phone turns the live dialpad mode on or off. With the live dialpad
feature enabled, the 6905 IP phone automatically dials out and turns on handsfree mode as soon as a
dialpad/keypad key or programmable key is pressed. With live dialpad disabled, if you dial a number while
the phone is on-hook, lifting the receiver or pressing the initiates a call to that number.
NOTE: Availability of this feature is dependent on your phone system or service provider.
You can enable/disable the live dialpad using the IP phone UI only.
Enabling/Disabling Live Dialpad
IP Phone UI
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Live Dialpad.
4. Use the navigation keys to navigate to ON or OFF.
5. Press the key or select Set to save your selection.
Time and Date
On the IP phones, you can configure the following:
• Time and date