11
G
ETTING STARTED VOICE SERVICES
• For MiCloud Connect, enter User DID and Password.
• For MiVoice Connect in the Config. Server field, enter the MiVoice Connect Server IP address.
Or, edit the existing MiVoice Connect Configuration Server address.
• For Manual Configuration, enter information in the following fields:
– In the Download Protocol field, select the protocol for downloading firmware from the server.
– In the Primary Server field, enter the domain name or the IP address of the server.
– In the Primary TFTP Path field, enter the name of the folders where the firmware you want to install
must be stored.
• For Manual Software Upgrade, enter information in the following fields:
– In the Download Protocol field, select the protocol for downloading firmware from the server
– In the Server field, enter the domain name or the IP address of the server.
– In the Port field, enter the server port number that is used for downloading firmware.
– In the Path field, enter the name of the folders where the firmware you want to install must be stored.
To Next Page
Loading...
