19
M
ETHODS FOR CUSTOMIZING YOUR PHONE PHONE OPTIONS THROUGH THE MITEL WEB UI
3. You can logout of the Mitel Web UI at any time by clicking Log Off.
The following categories display in the side menu of the Mitel Web UI: Status, Operation, and Basic
Settings .
HEADINGS DESCRIPTIONS
Status The Status - section displays the network status and the MAC address of the IP
phone. It also displays hardware and firmware information regarding the IP phone,
and information about the SIP account(s) currently configured on the phone. The
information in the Status window is read-only.
Operation User Password - Allows you to change the user password.
Phone Lock - Allows you to assign an emergency dial plan to the phone, lock the
phone to prevent any changes to the phone and to prevent use of the phone, as
well as reset the user password.
Programmable Keys - Allows you to configure up to 3 programmable keys with
functions identified.
Available functions for programmable keys are listed in the table Softkey list
provided in Programmable Keys topic.
Keypad Speed Dial - Allows you to assign a speed dial number to a specific digit
on the phone’s keypad/dialpad for speed dialing purposes.
Directory - Allows you to copy the Callers List and Local Directory from your IP
phone to your PC.
Reset - Allows you to restart the IP phone when required.
To Next Page
Loading...
