101
HANDLING CALLS CONFERENCING CALLS
In a local conference call, you use the arrow keys to scroll to a party on the list, the Drop
key to drop a selected party and the 3 Leave key to leave the conference.
Using Local Conferencing
Use the following procedure to create a conference call using local conferencing.
IP PHONE UI
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset
or press the key. A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to
the conference.
4. Press the key.
5. Enter the phone number of Party 3.
NOTE: Users are able to edit the destination number by pressing the navigationkey, which acts
as a Backspace key.
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to
the conference.
7. Press the key again to add Party 3 to the conference. Party 1 (which is yourself),Party 2, and
Party 3 are all connected to a single conference.
To Next Page
Loading...
