160
ADDITIONAL FEATURES BROADSOFT BROADWORKS EXECUTIVE AND ASSISTANT SERVICES
Mitel Web UI
1. Click on Basic Settings->Account Configuration.
2. Click Save Settings.
IP Phone UI
1. Press the Options key, the navigation key, and then the Enter key to enter the Call Forward
menu
or
Press the Call Forward programmable key.
2. Press the navigation key three times to select Forward Filtering.
3. Press the Change key to enter the Call Forward Mode Forward Filtering menu.
4. Press the navigation key to highlight the Call Forward State menu.
5. Press the Change key to enter the Call Forward State menu.
6. Press the Next key to toggle the Call Forward State option from ON to OFF.
7. Press the Set key.
8. Press the Done key.
9. Press the Confirm key to apply the changes. An X will be displayed beside Fwd Filtering indicating
call forwarding of all filtered calls is to be deactivated.
10. Press the Done key again.
11. Press the Confirm key again.
12. Press the Goodbye key to return to the idle screen. The “CFWD Filtering” message will be removed
from the idle screen and the MWI and (if configured) Call Forward key LEDs will turn off indicating
Forward Filtering is deactivated.
NOTE: Selecting the “All Off” option is also applicable to Forward Filtering. For more information on
the “All Off” option, see Using CFWD via the IP Phone UI
To Initiate a Call on Behalf of an Executive
Use the following procedure to initiate a call on behalf of an Executive:
To Next Page
Loading...
