10
GETTING STARTED PLUGGING IN AND STARTING THE PHONE
The 6910 phone may also look for configuration servers on your local network (press Skip to continue
without checking for servers).
If appropriate servers are found they are listed for you to select from by scrolling down to view the
complete list. (Press Skip to continue without selecting a server).
The 6910 phone then checks settings and looks for new configuration and firmware updates from a
server. If a new update is found, the phone displays the message Updating Configuration. This may
take a few moments while the phone downloads the latest updates.
NOTE: New updates to your phone can be automatically scheduled from the server. This is set up on the
phone system by your System Administrator and should be scheduled during non-business hours or slow
call periods.
WARNING: DO NOT UNPLUG OR REMOVE POWER TO THE PHONE WHILE IT IS CHECKING OR
INSTALLING FIRMWARE AND CONFIGURATION INFORMATION.
To Next Page
Loading...
