Mitsubishi Electric 3F-14C-WINE - Page 122

11-122 11-122
To change the position dividing the top and bottom screens, drag the border line with the mouse. Also, the display
position of each editing screen can be changed by dragging the title "position" or tab "XYZ"/"Joint"/"Work coordinate".
This is handy when you want to expand the command edit screen, for example because there are many lines of
commands. For details, see "11.5 Customizing the Display Position".
The background color for the command edit screen depends on the robot language used. The background color can
be changed from option screen. For details, refer to "11.6.11Setting the background color of the program
editor".
Table 11-2 Command Edit Screen Background Color (Initial color)
Robot language
Background color
Normal
Debugging
MELFA-BASIC VI
White
Light blue
MELFA-BASIC V
White
MELFA-BASIC IV
Light yellow
Movemaster commands
Light green
Debugging means when the program is opened in debugging status.