Mitsubishi Electric 3F-14C-WINE - Ribbon During Program Editing

11-123 11-123
11.4. Ribbon During Program Editing
During program editing the "File", "Edit", "Debug" and "Tool" tabs are displayed on the ribbon.
Figure 11-9 Ribbon During Program Editing
The button in each of these tabs are as follows.
Tab
Group
Button
Explanation
Menu
item
Home
Print
Page Setup
Pages in the program to print can be customized.
11.10.3
Print
preview
You can preview how a printed page of the program
will look.
11.10.1
Print
This prints the program.
11.10.2
File
Save
Save
Saves the program being edited with its current
name.
11.9.1
Save As ->
PC...
Saves the program being edited with its current
name on the PC
11.9.2
Save As ->
Robot...
Saves the program being edited with its current
name on Robot controller
11.9.3
Save As ->
Template
Save the editing program as a template to PC
11.9.4
Program template
Insert/Edit
It is possible to insert template to editing program
and edit template
11.7.4.1
5
Edit
Command line
Cut
Cuts a character string from the command being
edited.
11.7.4.2
Copy
Copies a character string in the command being
edited.
11.7.4.1
Paste
Pastes the copied or cut character string to the
specified location.
11.7.4.3
Undo
Cancels the command edit and return to the
previous state
Redo
Redo the command edit
Syntax
Check
You can check whether or not the edited robot
program is syntactically correct.
11.7.4.13
Template
You can display a list of the commands and make
insertions on the program command edit screen.
11.7.4.14
Jump
Jumps to the specified step number or label.
11.7.4.9