17-384 17-384
17.4. Offline restore (PC -> Offline project)
You can rewrite the offline project with the backup data in the personal computer. For this restore function, only
the backup data it kind is [All] and [Parameter] can be used.
Use this function in the offline mode.
(1) In the project tree, open the [Backup] in the target project and open the [All] or [Parameter].
(2) In there, right click the backup data for restore, then the context menu will be displayed.
(3) In this context menu, select the [Restore], then the message confirming restore to offline project will be
displayed.
(4) By click [Yes] in this message, the offline project is rewritten with the backup data.
Figure 17-13 Offline restore
The backup data used in this function, not only the backup data described in "17.3 Offline backup (Offline
project -> PC) " (back up from the offline) but also it described in "17.1 Backup(Robot -> PC)" (back up from the
robot controller) can be used.
By restoring the backup data of the robot controller to the project, on the simulation you can check and edit the
environment of the robot controller.
To Next Page
Loading...
