8-89 8-89
8.15. Copying Programs Between Projects
Use program management to copy or move a created robot program to another project. For details on the operation
method, see "11.13 Program Management", "11.13.2 Copy", or "11.13.3 Move".
It is possible to copy by drag and drop the project name in the project tree.
Please refer to "11.13 Program Management" in this manual for details.
It is possible to change the display order
of the projects in the tree.
It is possible to change the display order of the projects in the tree.
Drag the project with the mouse, and drop it at the transportation destination. The project will
move to the top of the dropped project.
To Next Page
Loading...
