Mitsubishi Electric 3F-14C-WINE - Open the Error Record Form Backup Data

17-388 17-388
Figure 17-21 Event history
17.11. Open the error record form backup data
Click the right mouse button on the backup data and click "Error record" from the menu to open the error record
of backup data. Display the error record up to the point when the backup was created.
This function is available only for "All" backup data of CR800 series robot controller. For details, refer to
"14.2.6.4Record information".
Figure 17-22 Event record
The software version of the controller that can use the error record function is as follows. Error record can not be
displayed form all backup data acquired by controller other than the version below.
Controller
Software Version
CR800-D/CR800-R/CR800-Q All
CR750-D/CRnD-700 Ver.S1j or later
CR750-Q/CRnQ-700 Ver.R1j or later