Mitsubishi Electric 3F-14C-WINE - Transfer Offline Parameters to Robot Controller

8-83 8-83
8.10. Transfer offline parameters to robot controller
The information setting on edit project screen is registered in the offline parameter. The offline parameters can be
transferred to the robot controller by the following two methods.
Method(1)
1) Back up the project in offline mode.
2) After changing the online mode, restore the backed up project.
3) Select the parameters on the restore screen and execute the restore.
Figure 8-20 Parameter transfer procedure
Method(2)
1) Move to online mode, select the offline parameter item of the project and click the right mouse button. Select
and click [Write to controller] in the displayed context menu.
2) After the parameter selection screen is activated, select the parameters to be transferred and click the [OK]
button.