11-198 11-198
11.15.2. Online editing
When you connect to controller supported SQ Direct, [SQ Direct] menu is added to [Online] menu in project-tree.
When you double-click [Online] -> [SQ Direct] in the target project,
SQ Direct screen is displayed with position data 1 to 999 loaded.
Figure 11-102 position edit screen for SQ Direct (Online)
Timing from which position data is written.
The timing at which the position data is written by the controller is at the next time the power
supply is turned ON.
Turn on the controller power again to use the controller's position data after online edit.
To Next Page
Loading...
