Mitsubishi Electric 3F-14C-WINE - Change to the Small Operation Panel; How to Change the Display Type

19-479 19-479
19.3. Change to the small operation panel
You can change the display of operation panel to the type of small size.
Figure 19-15 Comparison of the display types of operation panel
19.3.1. How to change the display type
You can change the display type of operation panel from the option screen. To display the option screen, you will
select the [Option] in [Workspace] tab from the ribbon.
By the [Small Size] in [Operation Panel] is checked, the operation panel will be displayed in type of small size
when RT ToolBox3 is executed next time or later.
If you want to return the operation panel to the standard type, please uncheck the [Small Size].
Standard type
Small size type