18-440 18-440
18.3.4. Copying/Pasting of parts
Parts can be copied.
(1) Click the part to copy to select it (<a>).
(2) After the "Edit menu" window is displayed, click the [Copy] button (<b>).
(3) Click the position (block) where the part is copied onto (<c>).
(4) After the "Select item" window is displayed, click the [Paste] button (<d>).
At this time, the position (block) where the part is copied onto is green.
A copy confirmation message will be displayed. Click the [Yes] button.
Figure 18-44 Copy/Paste of parts
A copy confirmation massage is displayed
when you click a click the [Paste] button.
To Next Page
Loading...
