Mitsubishi Electric 3F-14C-WINE - Command Format Hints; Pasting Line Numbers

11-133 11-133
11.6.4. Command format hints
You can use pop-up hint display to display the format for the robot program command, system functions, and system
status variables displayed in the command edit area.
Figure 11-17 Command Edit Area Command Format Hint Display Settings
11.6.5. Pasting line numbers
To paste a copied robot program to a robot program created with MELFA-BASIC V or MELFA-BASIC VI, either
delete or past the line number, or select [Page with line number]. This is handy when pasting and using programs
created with MELFA-BASIC IV or examples of robot programs in Instruction Manuals.
Figure 11-18 Line Number Pasting Setting
The format and description
corresponding to the selected
input candidate are displayed
Checked
Unchecked
Copy source robot program
Paste operation