13-280 13-280
13.11. Parameter printing
You can print the parameter values held in a robot controller.
Display the parameter to print, and click the [Home] tab -> [Print] group -> [Print] button on the ribbon. The print
screen is displayed, so check the printer, then click the [OK] button. Printing starts.
You can preview how a printed page will look by clicking the [Home] tab -> [Print] group -> [Print preview] button
on the ribbon.
Figure 13-97 Parameter Printing
Install the printer beforehand.
Install the printer beforehand. For details on how to install printers, refer to the operation manuals
for your printer and computer.
To Next Page
Loading...
