Mitsubishi Electric 3F-14C-WINE - Changes in RT Toolbox3 Display Format; Changing the Display Language; Changing the Display Style

3-51 3-51
3.3. Changes in RT ToolBox3 Display Format
The display language and display style of RT ToolBox3 can be changed.
3.3.1. Changing the display language
The screen for changing the RT ToolBox3 display language can be changed by clicking the [Select Display
Language] button in the [View] tab -> [View Settings] group on the ribbon.
Figure 3-5 Display language switching
When the display language has been changed, the display will be in the newly set language when RT ToolBox3 is
next started up.
A list of languages that can be selected as follows.
Languages
English(
英語
)
Japanese(
日本語
)
Chinese Simplified(简体中文)
Chinese traditional(
繁體中文
)
Version 1.01B or later, when non-Japan has been selected, regardless of the "LNG" parameter setting, the controller
turns on the language of communication in
English. Sets the Japan and switch to Japan.
This function can be used with Version 1.01B or later of the CR800/750/700 series controller.
3.3.2. Changing the display style
The screen for changing the RT ToolBox3 display style can be changed by clicking the [Select Display Language]
button in the [View] tab -> [View Settings] group on the ribbon.
Figure 3-6 Display Style Switching
When the display style has been changed, the display will be in the newly set style when RT ToolBox3 is next started
up.