9-96 9-96
9.2. Connection Settings
Click the name of the project to display the project tree for with the right button of the mouse, then from the right
button menu, click [Edit Project]. The project edit screen is displayed. Set connection settings in the "Step 3.
Communication" page of the Edit Project screen.
Figure 9-1 Connection Settings
Select the communication method, and set the details for each communication method in the [Communication] field.
After setting the details, click the [Finish] button.
The content of the detailed settings for each communication method is explained from the following section
onwards.
Do not connect from multiple projects to 1 controller at the same
time.
Do not connect from multiple projects to 1 controller at the same time.
The same data may be referred to, and the data not read correctly.
Do not connect USB to multiple controllers from 1 computer.
When using USB connection, 1 computer can connect to only 1 robot controller. It is also not
possible to connect to multiple controllers using the USB hub.
To Next Page
Loading...
