9-95 9-95
(*2) For details on the communication settings on the robot controller side for CR800-R/CR800-Q/CR750-Q/CRnQ-700
series controllers, see "Detailed explanations of functions and operations" and "Standard Specifications" in the
user's manual for the robot controller.
Moreover, use the “GX Developer” to set the PLC communication settings.
(*3) For details on the Ethernet connections on the robot controller side for CRn-500 series controllers, see the "Ethernet
Interface Option User's Manual".
(*4) When using a USB connection, 1 computer can connect to only 1 robot controller.
To Next Page
Loading...
