11-200 11-200
11.15.4. Program management
You can copy, delete, compare and rename SQ Direct file.
After selecting target program in project-tree, and click right button with the mouse.
Then right button menu is displayed, and click [Program Manager].
Then the program manager screen is displayed.
Figure 11-104 Launch program manager
As the edit operation is similar to program management, the following page explains only different
parts.
Position data
1 to 999 in the robot files for SQ Direct is shown as [*SQ Direct] in the program
manager.
“ * ” is to prevent customer from using as a file name by mistake.
Keep in mind that this differs in meaning from the “*” indicating “all”.
To Next Page
Loading...
