Mitsubishi Electric 3F-14C-WINE - 23 I;O Simulator; Simulator Settings

23-613 23-613
23. I/O Simulator
23.1. Summary
The I/O simulator simulates the signal communication between robots. This function can also interact with GX
Simulator2, 3 devices. (For details of GX Simulator2, 3, refer to GX WORKS2, 3’s manual.)
23.2. Simulator settings
Before starting the I/O simulator, create an I/O simulator definition file.
Double-click [I/O Simulator] -> [Simulator Setting] on the project tree to display the [Simulator Setting] screen.
Checking [Enable] checkbox applies the signal connection to the I/O simulator.
Figure 23-1 Simulator setting screen
Right-click on the list of signal connection to display the right button menu.
Figure 23-2 Right button menu.
(1) Add
Add a new signal connection.
Select a row and click the [Add] button to add a new signal connection.
(2) Edit
Edits the selected signal connection row.
For editing signal connections, refer to “23.3
Signal connection edit screen”.
(2)
(4)
(1)
Check to apply the signal connection to I/O simulator.
(3)
This Software supports only GX Simulator2, 3.
Caution
(1)
(2)
(3)
(7)
(8)
(6)
(5)