23-614 23-614
Figure 23-3 Add/Edit signal connection.
(3) Delete
Deletes the selected signal connection row.
You can also delete multiple rows at the same time.
(4) Up / Down
Moves the selected signal connection row up/down.
You can also move multiple rows at the same time.
Signal connections are applied in descending order.
(5) Load
Loads signal definitions saved in an I/O simulator definition file.
Be aware that the signal selection settings shown in the signal connections list will be cleared.
(6) Save
Saves the current signal connection settings into an I/O simulator definition file.
During the I/O simulator operating, you can choose whether to apply the save setting to the I/O
simulator.
(7) Copy / Paste
Copies / Pastes signal connections.
You can copy / paste multiple rows at the same time.
(8) Paste in reverse
When both the source and destination are robots, you can swap source for destination by pasting.
To Next Page
Loading...
