Mitsubishi Electric 3F-14C-WINE - Editing of Existing Parts

18-439 18-439
18.3.2.14. Save and end of editing user definition screen
After editing the user definition screen, click the [Save] button (<a>).
Click [x] (<b>) to conclude the edit.
Figure 18-42 Save and end of editing user definition screen
18.3.3. Editing of existing parts
Edit already-registered parts by the following operation.
(1) Click the part to be edited (<a>).
(2) After the "Edit menu" window is displayed, click the [Edit] button (<b>).
(3) The edit screen for the selected parts is displayed. Change the setting contents and click the [OK] button
(<c>).
Figure 18-43 Edit of existing parts
<a>
<b>
<c>
<a>
<b>