18-456 18-456
separately are recommended.
Figure 18-63 Example of 9 markers in camera vision (Image)
(4) Calculate vision calibration data
When 4 or more data on the list of [Teaching points] are enabled, the [Calculate after selecting 4 points or
more] button becomes enabled. Click the button to calculate the vision calibration data and display the data in
the [Result homography matrix].
Figure 18-64 Calculating vision calibration data
(5) Write to robot
Click the [write to robot] button to write the calculated vision sensor calibration data [VSCALBn] (ānā is the
calibration number) to the robot controller.
As shown in the figure below, the values of the calibration calculation results are displayed at the top, and the
values currently set in the controller are displayed at the bottom for confirmation.
To Next Page
Loading...
