Mitsubishi Electric 3F-14C-WINE - Page 593

21-593 21-593
The position data which can be displayed is as follows.
Table 21-10 The position data which can be displayed
Preservation place
Kinds of program
Remarks
Robot program in
the robot controller
Movemaster
command
A simulation cannot be used when Movemaster
command is selected.
MELFA-BASIC IV
MELFA-BASIC V
MELFA-BASIC VI
SQ Direct
Only a CRnQ type can be displayed.
Robot program in
the project
Movemaster
command
A simulation cannot be used when Movemaster
command is selected.
MELFA-BASIC IV
MELFA-BASIC V
MELFA-BASIC VI
SQ Direct
Backup programs