21-610 21-610
If the [3D view] tab -> [Rec.] group -> [Stop] button on the ribbon is clicked during recording or when recording is
paused, recording is stopped and the "Save As" dialog for saving the AVI file opens.
Figure 21-153 "Save As" Dialog
Also, recording functions can be set before recording by the [3D view] tab -> [Rec.] group -> [FPS] combo
box/[Auto save] checkbox on the ribbon. These items cannot be operated during recording. So, set them
beforehand.
Figure 21-154 3D Monitor: Recording Options
Frame rate (FPS)
You can change the frame rate of the video data to save the avi file.
Setting range: 30/20/10[FPS]
* By raising the frame rate the video will be smoothed, but on the other hand, the file size will be
large(recording time is short).
Auto save
When the [Auto save] checkbox is selected, the AVI file is automatically saved to the "Videos" folder in the
workspace folder when recording is stopped.
To Next Page
Loading...
