A - 12
MANUALS
The manuals related to this product are listed below.
Please place an order as needed.
Relevant Manuals
Printed manuals are available separately. Please place an order with the manual
number (model code) in the table above.
COMPLIANCE WITH THE EMC, LOW VOLTAGE, AND MACHINERY DIRECTIVES
(1) Method of ensuring compliance
To ensure that Mitsubishi Electric programmable controllers maintain EMC and Low
Voltage Directives when incorporated into other machinery or equipment, certain
measures may be necessary. Please refer to one of the following manuals.
• QCPU User's Manual (Hardware Design, Maintenance and Inspection)
• Safety Guidelines (This manual is included with the CPU module or head mod-
ule.)
The CE mark on the side of the programmable controller indicates compliance with
EMC and Low Voltage Directives.
(2) Additional measures
No additional measures are necessary for the compliance of this product with EMC
and Low Voltage Directives.
Manual name
Manual number
(model code)
GX Developer Version 8 Operating Manual
Operating methods of GX Developer, such as programming, printing, monitoring, and debugging
(Sold separately)
SH-080373E
(13JU41)
GX Developer Version 8 Operating Manual (Function Block)
Operating methods of GX Developer, such as creating and printing function blocks (Sold separately)
SH-080376E
(13JU44)
GX Works2 Version1 Operating Manual (Common)
System configuration, parameter settings, and online operations (common to Simple project and Structured
project) of GX Works2 (Sold separately)
SH-080779ENG
(13JU63)
GX Works2 Version1 Operating Manual (Intelligent Function Module)
Operating methods of the intelligent function module of GX Works2, such as parameter settings, monitoring,
and predefined protocol support function (Sold separately)
SH-080921ENG
(13JU69)
To Next Page
Loading...
Need help?
General
