6 - 11
6.3 For Use in Remote I/O Network (Q68AD-G)
6
PROGRAMMING
6.3 For Use in Remote I/O Network (Q68AD-G)
(1) System configuration
(2) Conditions for the intelligent function module switch setting
Based on the setting conditions given in the above, make the intelligent function mod-
ule switch settings.
Select the "I/O assignment" tab on the "Intelligent function module switch settings"
window, and click "Switch setting" to set the following values.
Input range setting Normal resolution mode/ High resolution mode
CH1
4 to 20mA High resolution mode
CH2
CH3
CH4
to
CH8
not used -
Switch No Setting value
Switch 1 0000H (CH1 to CH3: 4 to 20mA
CH4 to CH8: Default)
Switch 2 0000H
Switch 3 -
Switch 4 0F00H (High resolution mode)
Switch 5 0000H (0H: Fixed)
QY10 (X/Y110 to X/Y11F)
Q68AD-G (X/Y120 to X/Y12F)
QX10 (X/Y100 to X/Y10F)
QJ72LP25-25
QX10 (X20 to X2F)
QJ71LP21-25
QY10 (Y30 to Y3F)
Remote master station (Network No. 1) Remote I/O station (Station No. 1)
To Next Page
Loading...
Need help?
General
