Mitsubishi Electric MELSEC iQ-R16MTCPU - Page 30

28
1 MULTIPLE CPU SYSTEM
1.1 Multiple CPU System
■Temperature input module
Item
*1
Setting range
*2
Default value
Basic
setting
RTD type
selection
function
RTD type setting Pt100(-200 to 850)/Pt100(-20 to 120)/JPt100(-180 to
600)/JPt100(-20 to 120)/Pt100(0 to 200)/JPt100(0
to 200)/Ni100(-60 to 250)/Pt50(-200 to 650)
Pt100(-200 to 850)
Offset/gain setting Factory default setting/User range setting Factory default setting
Thermocouple
type selection
function
Thermocouple type setting Thermocouple K/Thermocouple E/Thermocouple J/
Thermocouple T/Thermocouple B/Thermocouple R/
Thermocouple S/Thermocouple N
Thermocouple K
Offset/gain setting Factory default setting/User range setting Factory default setting
Cold junction
temperature
compensation
with/without
setting function
Cold junction temperature
compensation with/without
setting
With cold junction temperature compensation/Without cold
junction temperature compensation
With cold junction
temperature compensation
Operation mode
setting function
Operation mode setting Normal mode (conversion process)/Offset/gain setting
mode
Normal mode (conversion
process)
Conversion
enable/disable
setting function
Conversion enable/disable
setting
Conversion enable/Conversion disable Conversion disable
Temperature
conversion
system
Average processing setting Sampling processing/Time average/Count average/Moving
average/ Primary delay filter
Sampling processing
Time average/Count average/
Moving average/Primary delay
filter constant setting
Time average: 40 to 5000ms
Count average: 4 to 500 times
Moving average: 2 to 200 times
Primary delay filter: 1 to 500 times
