Mitsubishi AE-200A User Manual

156
WT07627X03
[PI Controller]
AE-200
AE-50
AE-50
AE-50
AE-200
AE-50
AE-50
AE-50
[External Contact point input] (1)
AE-200
AE-50
AE-50
AE-50
[External Contact point input] (2)
AE-200
AE-50
AE-50
AE-50
Note: An external input/output adapter (PAC-YG10HA-E) is
required for each AE-200/AE-50/EW-50.
[From external system]
AE-50
AE-50
AE-50
AE-200
<When a PI controller (PAC-YG60MCA) is used> <When a built-in Pulse Input (PI) is used>
Maximum three
AE-200/AE-50/EW-50 units
Peak Cut method [Remote AE]
Pulse-watt-
hour meter
Reads control
level.
Pulse
(Built-in Pulse Input (PI))
Reads electric
energy values.
Reads control
level.
Peak Cut method [Remote AE]
PI controller
Maximum three
AE-200/AE-50/EW-50 units
Pulse
Pulse-watt-
hour meter
Maximum three
AE-200/AE-50/EW-50 units
Demand level is
input.
Demand
controller
External input/output
adapter (PAC-YG10HA-E)
LAN
Peak Cut method [Remote AE]
Reads control
level.
Maximum three
AE-200/AE-50
/EW-50 units
Demand level is
input.
Demand
controller
External input/output
adapter (PAC-YG10HA-E)
Demand level
signal is sent.
PLC etc.
Pulse
Pulse-watt-
hour meter
Maximum ten
AE-200/AE-50/EW-50 units

Mitsubishi AE-200A Specifications

General

Brand	Mitsubishi
Model	AE-200A
Category	Control Systems
Language	English